<strong>Incredible Stripping Paint From Furniture References</strong>. If there are parts you can’t reach then. There are three ways of removing paint from wood:
Table of Contents
Table of Contents
Let The Alcohol Or Thinner Work For 5 To 10 Seconds, And Then Wipe It Off With A Rough Cloth Or With Steel Wool.
The surface will go very dull as it starts to dry and will be completely dull once applied. Pour some stripper onto the paper plate and then use the brush to brush the stripper all over. Use something sharp, like a pallet knife, and scrape away a small patch of paint.
If You’re Going To Strip Furniture, You Need To Get The Right Tools (See The Materials List Above).
Web first, lay down some cardboard under the piece so you don’t get stripper and paint all over the floor. Keep adding small amounts of water and scrubbing until all the paint is gone. Wash it with tsp substitute mixed with water.
Yes, I Actually Used My Kids’ Old Toothbrush!
With 120 grit sandpaper, i carefully sanded with the grain to remove any remaining paint residue or other imperfections in the wood. Make sure the desk is clean before spraying it. In a pinch, an old lightning mcqueen toothbrush worked, but if you plan ahead and gather all the supplies, you won’t resort to.
Web Instructions Establish The Work Area.
Let the stripper sit for at least 10 minutes. This is optional, but you can cover the stripper with saran wrap and leave it longer to help the citristrip penetrate deeper. Maxwell suggests writing numbers on the parts or even taking a few “before” pictures to help with reassembly when you’re done.
If It Comes Away Easily Then You’re Ready To Go.
With your piece of furniture sitting on the drop cloth, ‘paint’ the stripping gel on the flat surfaces, covering the areas generously. Remove or cover sensitive areas. It usually takes about two to three rounds of this to finish, she adds.
